Industrial Surface Centrifugal Transfer Pump is an industrial spare component used for Clean water transfer from underground reservoirs to overhead factory storage tanks. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Industrial Surface Centrifugal Transfer Pump
Industrial Surface Centrifugal Transfer Pump is an industrial spare component used for Clean water transfer from underground reservoirs to overhead factory storage tanks. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Functional engineering application
The Industrial Surface Centrifugal Transfer Pump (MPN: BLX-CP-2000) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Generic BLX-CP-2000 | |
| IDENTIFICATION | |
| Component Type | Industrial Surface Centrifugal Transfer Pump |
| Manufacturer / Brand | Generic |
| Part Number (MPN) | BLX-CP-2000 |
| Stock Keeping Unit (SKU) | STX-BLX-BLXCP2000 |
| PERFORMANCE & RATINGS | |
| Rated Motor Power | 2.2 kW (3.0 HP) |
| Supply Operating Voltage | 415V AC 50Hz 3-Phase (240V 1-phase model available) |
| Maximum Flow Rate (Qmax) | 30 m³/h (500 L/min) |
| Fluid Temperature Range | -10°C to +90°C |
| Maximum Working Pressure | 6 bar (0.6 MPa) |
| TECHNICAL PARAMETERS | |
| Rated Speed | 2900 RPM (2-Pole) |
| Full Load Current | 4.8 A @ 415V |
| Maximum Head (Hmax) | 32 meters (3.14 bar) |
| Motor Protection Rating | IP55 (Dust & water-spray protected) |
| CONSTRUCTION & CONNECTION | |
| Suction Port Diameter | G 2" Female BSP Thread (50 mm) |
| Discharge Port Diameter | G 2" Female BSP Thread (50 mm) |
| Pump Casing Material | Heavy Grey Cast Iron GG25 |
| Impeller Material | Precision Machined Forged Brass / AISI 304 Stainless Steel |
| Mechanical Seal | Carbon / Ceramic / NBR (Silicon Carbide optional for abrasive fluids) |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
- Pedrollo HF
- Ebara CMA
- Lowara CEA
Commonly installed on equipment from
Common questions on this part
No. The BLX-CP-2000 is an end-suction centrifugal pump that requires the suction line and pump volute to be primed (filled with water) before starting. When drawing from a reservoir below the pump centerline, a quality non-return foot valve must be installed on the suction pipe.
The pump is designed for clean or slightly cloudy water with suspended solids under 0.2%. For sandy borehole water or heavy sludge, a submersible slurry pump or positive displacement pump is recommended.
Yes. The 3-phase motor can be paired with an inverter drive (such as the BLX-VFD-3000 or BLX-SPI-3100) to provide constant-pressure water boosting and substantial energy savings.
STARNEX provides a 12-month manufacturer warranty against manufacturing defects on all Blaxsmith industrial pumps.
Industrial surface pumps are available for dispatch within 1 to 2 business days in Nairobi and 2 to 3 days across major Kenyan towns.
