Electromagnetic Flow Meter is an industrial spare component used for Municipal and commercial water supply distribution monitoring. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Electromagnetic Flow Meter
Electromagnetic Flow Meter is an industrial spare component used for Municipal and commercial water supply distribution monitoring. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Functional engineering application
The Electromagnetic Flow Meter (MPN: BLX-MAG-700) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Generic BLX-MAG-700 | |
| IDENTIFICATION | |
| Component Type | Electromagnetic Flow Meter |
| Manufacturer / Brand | Generic |
| Part Number (MPN) | BLX-MAG-700 |
| Stock Keeping Unit (SKU) | STX-BLX-BLXMAG700 |
| CONSTRUCTION & CONNECTION | |
| Pipe Nominal Diameters | DN15 to DN300 (Standard stock DN50, DN80, DN100) |
| Flange Standard & Rating | DIN EN 1092-1 / ANSI B16.5 (PN16 / PN40) |
| Lining Material Options | PTFE (Teflon) / Hard Rubber (Neoprene) |
| Electrode Materials | Hastelloy C / AISI 316L Stainless Steel / Titanium |
| TECHNICAL PARAMETERS | |
| Measurement Principle | Faraday's Law of Electromagnetic Induction |
| Measurement Accuracy | ±0.5% of reading (±0.2% optional) |
| Velocity Range | 0.3 to 10.0 m/s |
| Minimum Fluid Conductivity | ≥ 5 µS/cm |
| Output Signals | 4-20mA DC, Frequency/Pulse (0-5 kHz), Relay Alarm |
| Digital Communication | RS-485 Modbus RTU (HART optional) |
| Sensor Ingress Protection | IP67 standard / IP68 for submersible pit installation |
| PERFORMANCE & RATINGS | |
| Power Supply Options | 85 - 265 V AC (50/60 Hz) or 24 V DC |
| Ambient & Fluid Temp | Fluid: -20°C to +120°C (PTFE); Ambient: -20°C to +60°C |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
- Krohne OPTIFLUX
- Endress+Hauser Promag
- ABB ProcessMaster
Commonly installed on equipment from
Common questions on this part
Yes. Borehole water has a natural electrical conductivity well above the 5 µS/cm threshold, making the BLX-MAG-700 ideal for WARMA (Water Resources Authority) extraction monitoring and logging.
No. Electromagnetic flowmeters require an electrically conductive fluid (conductivity > 5 µS/cm). Non-conductive fluids like pure hydrocarbons (diesel, kerosene) or ultra-pure deionized water (<0.1 µS/cm) require Coriolis or positive displacement gear meters.
Standard installation requires a minimum of 5 pipe diameters (5D) of straight pipe upstream of the meter and 2 pipe diameters (2D) downstream, free of valves, elbows, or reducers.
Yes. A remote-mounted transmitter option with up to 30 meters of shielded sensor cable is available for flooded meter chambers or elevated pipe bridges.
Yes. Every BLX-MAG-700 meter is wet-flow calibrated at the factory and delivered with a certified traceable calibration test certificate.
