Filter Elements is an industrial spare component used for Commercial Oil Burner Filter Maintenance. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Filter Elements
Filter Elements is an industrial spare component used for Commercial Oil Burner Filter Maintenance. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Functional engineering application
The Filter Elements (MPN: STX-FLT-ELEM-UNIV) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Generic STX-FLT-ELEM-UNIV | |
| IDENTIFICATION | |
| Component Type | Filter Elements |
| Manufacturer / Brand | Generic |
| Part Number (MPN) | STX-FLT-ELEM-UNIV |
| Stock Keeping Unit (SKU) | STX-FLT-ELEMV-036 |
| TECHNICAL PARAMETERS | |
| Product Category | Universal Oil Filter Replacement Elements |
| Micron Rating Options | 15 Micron (Paper), 30-50 Micron (Sintered Plastic), 50 Micron (SS Mesh) |
| Element Height | 70mm - 85mm Standard Commercial Fit |
| Filter Media Options | Stainless Steel Mesh / Sintered Polypropylene / Resin Paper |
| Compatible Filter Bodies | Generic Clear Bowl, EOGB, York, Danfoss, Suntec, Parker |
| Fuel Compatibility | Diesel (AGO), Light Fuel Oil (LFO), Kerosene, Heavy Fuel Oil (HFO Pre-filtered) |
| Packaging | Individual Sealed Plastic Wraps (Box of 10 or Single) |
| Country of Manufacture | International OEM Standard |
| CONSTRUCTION & CONNECTION | |
| Element Diameter | Outer: 45mm - 52mm | Inner: 22mm - 26mm |
| End Cap Material | Oil-Resistant Synthetic Polymer with Top Gasket |
| PERFORMANCE & RATINGS | |
| Maximum Operating Temperature | 80°C (176°F) |
| Flow Capacity Range | Up to 60 L/h per element |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
Use 50-micron Stainless Steel Mesh for washable reusable use, Sintered Plastic for high dirt capacity with medium fuels, or 15-micron Paper for ultra-clean fine nozzle protection.
Yes, these elements are dimensioned to fit standard EOGB, York, Danfoss, and Generic 3/8" and 1/2" oil filter housings.
Elements should be inspected monthly and cleaned or replaced every 6 months, or whenever burner pump vacuum readings increase.
Soak the element in clean diesel or paraffin, brush gently with a soft nylon brush, and blow dry with low-pressure compressed air from the inside out.
Yes, each replacement element includes a top nitrile rubber sealing gasket to prevent fuel bypass.
A clogged element starves the oil pump, causes cavitation, damages pump gears, and leads to nozzle clogging and flame failure.
Standard outer diameter ranges between 45mm and 52mm, with a height of 70mm to 85mm.
No, paper filter elements are single-use disposable cartridges and must be replaced when dirty.
Stainless mesh elements can be used with heated HFO, but paper elements should only be used with light oils and diesel.
STARNEX stocks filter elements individually or in boxes of 10 at our Nairobi Industrial Area branch.
