Grundfos CM 10-3 Horizontal Multistage Centrifugal Pump is an industrial spare component used for Factory Water Transfer. STARNEX Industrial Spares supplies and sources Grundfos spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Grundfos CM 10-3 Horizontal Multistage Centrifugal Pump
Grundfos CM 10-3 Horizontal Multistage Centrifugal Pump is an industrial spare component used for Factory Water Transfer. STARNEX Industrial Spares supplies and sources Grundfos spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Functional engineering application
The Grundfos CM 10-3 Horizontal Multistage Centrifugal Pump (MPN: 98440075) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Grundfos 98440075 | |
| IDENTIFICATION | |
| Component Type | Grundfos CM 10-3 Horizontal Multistage Centrifugal Pump |
| Manufacturer / Brand | Grundfos |
| Part Number (MPN) | 98440075 |
| Stock Keeping Unit (SKU) | GRN-CM10-3 |
| TECHNICAL PARAMETERS | |
| Pump Technology | Horizontal Multistage Centrifugal |
| Maximum Head | 38 m (3.8 bar) |
| Electrical Supply | 380–415 V, 3-Phase, 50 Hz |
| Protection Rating | IP55 Enclosure |
| PERFORMANCE & RATINGS | |
| Nominal Flow Rate | 10.0 m³/h (166 L/min) |
| Motor Power Rating | 2.2 kW (3.0 HP) |
| Max Working Pressure | 10 bar (1.0 MPa) |
| Fluid Temp Range | -20°C to +90°C |
| CONSTRUCTION & CONNECTION | |
| Suction Connection | G 1½" Threaded Female |
| Discharge Connection | G 1¼" Threaded Female |
| Shaft Seal Material | AVBE (Carbon/Ceramic/EPDM) |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
The CM 10-3 delivers a nominal flow rate of 10 m³/h (approx. 166 L/min) with a maximum head pressure of 38 meters.
Yes, it features an IP55 heavy-duty 2.2 kW motor designed for continuous S1 operation in factory environments.
Yes, STARNEX dispatches via overnight courier to Mombasa, Kisumu, Nakuru, Eldoret, Thika, and across East Africa.
Yes, all Grundfos pumps supplied by STARNEX Industrial Spares in Kenya are 100% authentic, brand new, and backed by official manufacturer warranty support. We provide full traceability and origin certificates upon request for procurement audits.
Ex-stock units are dispatched within 24 hours from our Nairobi distribution hub. Same-day delivery is available for Nairobi, Thika, Athi River, and Kiambu. Regional dispatch to Mombasa, Kisumu, Nakuru, Eldoret, as well as Kampala (Uganda) and Dar es Salaam (Tanzania), takes 24–48 hours.
Yes, STARNEX Industrial Spares issues KRA E-TIMS electronic tax invoices with full PIN breakdown for all corporate, factory, and contractor purchases, ensuring total VAT and corporate audit compliance.
Absolutely. Our qualified technical application engineers assist maintenance managers and contractors with head loss calculations, duty point matching, NPSH requirements, and electrical compatibility before purchase.
Yes, STARNEX maintains a comprehensive inventory of original replacement mechanical seals, impellers, O-rings, bearings, and shaft sleeves for Grundfos industrial pumps.
Please refer to the technical specifications table above for exact voltage, phase, and frequency requirements. Most 3-phase industrial pumps operate on standard 380–415V 50Hz supplies common in East African power grids.
Manufacturing, Agriculture, Building Services, Industrial Maintenance facilities routinely deploy the 98440075 for reliable round-the-clock fluid handling.
