Grundfos SP 17-10 Submersible Borehole Water Pump is an industrial spare component used for Deep Well Groundwater Abstraction. STARNEX Industrial Spares supplies and sources Grundfos spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Grundfos SP 17-10 Submersible Borehole Water Pump
Grundfos SP 17-10 Submersible Borehole Water Pump is an industrial spare component used for Deep Well Groundwater Abstraction. STARNEX Industrial Spares supplies and sources Grundfos spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Functional engineering application
The Grundfos SP 17-10 Submersible Borehole Water Pump (MPN: 12A01910) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Grundfos 12A01910 | |
| IDENTIFICATION | |
| Component Type | Grundfos SP 17-10 Submersible Borehole Water Pump |
| Manufacturer / Brand | Grundfos |
| Part Number (MPN) | 12A01910 |
| Stock Keeping Unit (SKU) | GRN-SP17-10 |
| TECHNICAL PARAMETERS | |
| Pump Technology | Submersible Multistage Borehole Pump |
| Maximum Head | 64 m (6.4 bar) |
| Electrical Supply | 380–415 V, 3-Phase, 50 Hz |
| Construction | 100% High-Grade AISI 304 Stainless Steel |
| PERFORMANCE & RATINGS | |
| Nominal Flow Rate | 17 m³/h (283 L/min) |
| Motor Power Rating | 5.5 kW (7.5 HP) MS4000 |
| CONSTRUCTION & CONNECTION | |
| Discharge Connection | RP 2½" Threaded |
| Minimum Well Diameter | 6 inches (150 mm) |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
The SP 17-10 pump end requires a minimum 6-inch (150 mm) borehole casing.
Yes, it features specialized sand-flushing channels and durable Viton/rubber bearings designed to handle sand content up to 50 g/m³.
Yes, all Grundfos pumps supplied by STARNEX Industrial Spares in Kenya are 100% authentic, brand new, and backed by official manufacturer warranty support. We provide full traceability and origin certificates upon request for procurement audits.
Ex-stock units are dispatched within 24 hours from our Nairobi distribution hub. Same-day delivery is available for Nairobi, Thika, Athi River, and Kiambu. Regional dispatch to Mombasa, Kisumu, Nakuru, Eldoret, as well as Kampala (Uganda) and Dar es Salaam (Tanzania), takes 24–48 hours.
Yes, STARNEX Industrial Spares issues KRA E-TIMS electronic tax invoices with full PIN breakdown for all corporate, factory, and contractor purchases, ensuring total VAT and corporate audit compliance.
Absolutely. Our qualified technical application engineers assist maintenance managers and contractors with head loss calculations, duty point matching, NPSH requirements, and electrical compatibility before purchase.
Yes, STARNEX maintains a comprehensive inventory of original replacement mechanical seals, impellers, O-rings, bearings, and shaft sleeves for Grundfos industrial pumps.
Please refer to the technical specifications table above for exact voltage, phase, and frequency requirements. Most 3-phase industrial pumps operate on standard 380–415V 50Hz supplies common in East African power grids.
Agriculture & Farming, Water Utilities, Beverage Plants, Borehole Drilling Contractors facilities routinely deploy the 12A01910 for reliable round-the-clock fluid handling.
