LEO ACm150 1.5kW (2.0HP) Heavy-Duty Centrifugal Water Pump is an authentic LEO industrial component (Model/MPN: ACm150) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: ACm150, Rated Motor Power: 1.5 kW (2.0 HP), Electrical Supply: 220-240V, 50Hz, 1-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
LEO ACm150 1.5kW (2.0HP) Heavy-Duty Centrifugal Water Pump
LEO ACm150 1.5kW (2.0HP) Heavy-Duty Centrifugal Water Pump is an authentic LEO industrial component (Model/MPN: ACm150) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: ACm150, Rated Motor Power: 1.5 kW (2.0 HP), Electrical Supply: 220-240V, 50Hz, 1-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
Functional engineering application
OVERVIEW The LEO ACm150 is an industrial-grade 1.5kW (2.0HP) heavy-duty centrifugal water pump designed for rigorous water handling operations across Kenyan industrial, commercial, and agricultural facilities. Engineered with precision hydraulic clearances and high-grade metallurgical components, this pump ensures stable hydraulic throughput, low acoustic signature, and long service life under fluctuating operating conditions. OPERATING PRINCIPLES AND HYDRAULIC DESIGN Equipped with an optimized aisi 304 stainless steel impeller, the ACm150 efficiently converts mechanical shaft energy into hydraulic velocity and static pressure. With a maximum discharge head of 48 meters and peak throughput of 9.6 m3/h (160 L/min), the unit provides dependable pressure delivery. Port dimensions of 1½" G suction and 1" G discharge ensure smooth fluid velocity with minimal internal friction loss. CONSTRUCTION, MATERIALS AND MOTOR SPECIFICATIONS - Pump Body: HT200 Cast Iron with anti-rust electrophoresis with electro-deposition anti-rust coating - Impeller: AISI 304 Stainless Steel Impeller engineered for wear resistance - Mechanical Seal: Carbon / Ceramic / NBR providing positive shaft sealing without fluid weeping - Motor: Continuous duty induction motor (220-240V, 50Hz, 1-Phase), Class F insulation, IP44 ingress protection - Integrated Protection: Built-in thermal overload cut-out on single-phase windings; external overload relay recommended on three-phase installations KENYAN APPLICATION AND INSTALLATION GUIDELINES In East African operational settings, correct plumbing and electrical installation are vital for pump longevity: 1. Suction Plumbing: Install rigid suction piping of at least 1½" G diameter. For suction lift duties (up to 8m), always fit a high-integrity foot valve with stainless steel strainer screen to prevent loss of prime. 2. Electrical Protection: Wire the 220-240V, 50Hz, 1-Phase motor through a dedicated motor circuit breaker or contactor with calibrated thermal overload protection. On sites prone to voltage sags, fit an electronic under/over-voltage monitoring relay. 3. Priming: Completely fill the pump wet end and suction line with clean water through the top priming plug before energizing the motor. Never run the pump dry. 4. Foundation: Anchor the pump securely to a level concrete plinth with anti-vibration mountings to avoid pipe stress and bearing misalignment. PREVENTIVE MAINTENANCE AND STARNEX SPARES SUPPORT Inspect mechanical seal faces and shaft bearings every 2,000 running hours or semi-annually. Lubricate bearings where applicable and clean suction strainers periodically. STARNEX Industrial Spares maintains direct inventory of genuine LEO replacement seals, O-rings, impellers, capacitors, and terminal boxes at our Enterprise Road trade counter in Nairobi.
Genuine LEO ACm150 1.5kW (2.0HP) heavy-duty centrifugal water pump engineered for dependable continuous pumping. Delivers up to 9.6 m3/h (160 L/min) flow rate and 48m maximum head. Supplied in Kenya by STARNEX Industrial Spares with local stock and technical support.
Quotation & fulfilment
Parametric technical attributes
| LEO ACm150 | |
| IDENTIFICATION | |
| Component Type | LEO ACm150 1.5kW (2.0HP) Heavy-Duty Centrifugal Water Pump |
| Manufacturer / Brand | LEO |
| Part Number (MPN) | ACm150 |
| Stock Keeping Unit (SKU) | LEO-ACM150 |
| TECHNICAL PARAMETERS | |
| Model Code / MPN | ACm150 |
| Electrical Supply | 220-240V, 50Hz, 1-Phase |
| Maximum Head (Hmax) | 48 meters |
| Maximum Suction Lift | 8 meters |
| Ingress Protection & Insulation | IP44, Class F |
| PERFORMANCE & RATINGS | |
| Rated Motor Power | 1.5 kW (2.0 HP) |
| Maximum Flow Rate (Qmax) | 9.6 m³/h (160 L/min) |
| Maximum Working Pressure | 6.0 bar |
| Liquid Temperature Range | -10°C to +60°C |
| CONSTRUCTION & CONNECTION | |
| Suction Port Size | 1½" G |
| Discharge Port Size | 1" G |
| Impeller Material | AISI 304 Stainless Steel Impeller |
| Pump Body Material | HT200 Cast Iron with anti-rust electrophoresis |
| Mechanical Shaft Seal | Carbon / Ceramic / NBR |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | On request |
System fitment & verified replacements
Interchangeable models
Commonly installed on equipment from
Common questions on this part
The ACm150 is powered by a 1.5kW (2.0HP) motor delivering up to 48 meters head and 9.6 m3/h (160 L/min) flow through a 1½" suction and 1" discharge port.
Common applications include large hotel overhead water tank boosting, school campus water systems, coffee factory pulping water supply, and commercial sprinkler systems.
Single-phase ACm150 units use a 40uF / 450V capacitor. STARNEX stocks genuine replacements.
The 1½" suction line should maintain a continuous upward slope toward the pump intake with no high bends where air can become trapped.
Yes, genuine LEO stainless steel impellers and shaft seals are stocked at our Nairobi counter.
