LEO PS-02B 2.2kW (3.0HP) Heavy-Duty Digital Adjustable Pump Controller is an authentic LEO industrial component (Model/MPN: PS-02B) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: PS-02B, Rated Motor Power: 2.2 kW (3.0 HP), Electrical Supply: 220-240V, 50Hz, 1-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
LEO PS-02B 2.2kW (3.0HP) Heavy-Duty Digital Adjustable Pump Controller
LEO PS-02B 2.2kW (3.0HP) Heavy-Duty Digital Adjustable Pump Controller is an authentic LEO industrial component (Model/MPN: PS-02B) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: PS-02B, Rated Motor Power: 2.2 kW (3.0 HP), Electrical Supply: 220-240V, 50Hz, 1-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
Functional engineering application
OVERVIEW The LEO PS-02B is an industrial-grade 2.2kW (3.0HP) heavy-duty digital adjustable pump controller designed for rigorous water handling operations across Kenyan industrial, commercial, and agricultural facilities. Engineered with precision hydraulic clearances and high-grade metallurgical components, this pump ensures stable hydraulic throughput, low acoustic signature, and long service life under fluctuating operating conditions. OPERATING PRINCIPLES AND HYDRAULIC DESIGN Equipped with an optimized heavy-duty micro-switch & flow sensor, the PS-02B efficiently converts mechanical shaft energy into hydraulic velocity and static pressure. With a maximum discharge head of 100 meters and peak throughput of 15.0 m3/h (250 L/min), the unit provides dependable pressure delivery. Port dimensions of 1" G Male suction and 1" G Male discharge ensure smooth fluid velocity with minimal internal friction loss. CONSTRUCTION, MATERIALS AND MOTOR SPECIFICATIONS - Pump Body: Reinforced Polyamide Body with Pressure Gauge with electro-deposition anti-rust coating - Impeller: Heavy-Duty Micro-Switch & Flow Sensor engineered for wear resistance - Mechanical Seal: Stainless Steel Valve Plate & NBR Seals providing positive shaft sealing without fluid weeping - Motor: Continuous duty induction motor (220-240V, 50Hz, 1-Phase), Class F insulation, IP65 ingress protection - Integrated Protection: Built-in thermal overload cut-out on single-phase windings; external overload relay recommended on three-phase installations KENYAN APPLICATION AND INSTALLATION GUIDELINES In East African operational settings, correct plumbing and electrical installation are vital for pump longevity: 1. Suction Plumbing: Install rigid suction piping of at least 1" G Male diameter. For suction lift duties (up to 0m), always fit a high-integrity foot valve with stainless steel strainer screen to prevent loss of prime. 2. Electrical Protection: Wire the 220-240V, 50Hz, 1-Phase motor through a dedicated motor circuit breaker or contactor with calibrated thermal overload protection. On sites prone to voltage sags, fit an electronic under/over-voltage monitoring relay. 3. Priming: Completely fill the pump wet end and suction line with clean water through the top priming plug before energizing the motor. Never run the pump dry. 4. Foundation: Anchor the pump securely to a level concrete plinth with anti-vibration mountings to avoid pipe stress and bearing misalignment. PREVENTIVE MAINTENANCE AND STARNEX SPARES SUPPORT Inspect mechanical seal faces and shaft bearings every 2,000 running hours or semi-annually. Lubricate bearings where applicable and clean suction strainers periodically. STARNEX Industrial Spares maintains direct inventory of genuine LEO replacement seals, O-rings, impellers, capacitors, and terminal boxes at our Enterprise Road trade counter in Nairobi.
Genuine LEO PS-02B 2.2kW (3.0HP) heavy-duty digital adjustable pump controller engineered for dependable continuous pumping. Delivers up to 15.0 m3/h (250 L/min) flow rate and 100m maximum head. Supplied in Kenya by STARNEX Industrial Spares with local stock and technical support.
Quotation & fulfilment
Parametric technical attributes
| LEO PS-02B | |
| IDENTIFICATION | |
| Component Type | LEO PS-02B 2.2kW (3.0HP) Heavy-Duty Digital Adjustable Pump Controller |
| Manufacturer / Brand | LEO |
| Part Number (MPN) | PS-02B |
| Stock Keeping Unit (SKU) | LEO-PS-02B |
| TECHNICAL PARAMETERS | |
| Model Code / MPN | PS-02B |
| Electrical Supply | 220-240V, 50Hz, 1-Phase |
| Maximum Head (Hmax) | 100 meters |
| Maximum Suction Lift | 0 meters |
| Ingress Protection & Insulation | IP65, Class F |
| PERFORMANCE & RATINGS | |
| Rated Motor Power | 2.2 kW (3.0 HP) |
| Maximum Flow Rate (Qmax) | 15.0 m³/h (250 L/min) |
| Maximum Working Pressure | 10.0 bar |
| Liquid Temperature Range | 0°C to +60°C |
| CONSTRUCTION & CONNECTION | |
| Suction Port Size | 1" G Male |
| Discharge Port Size | 1" G Male |
| Impeller Material | Heavy-Duty Micro-Switch & Flow Sensor |
| Pump Body Material | Reinforced Polyamide Body with Pressure Gauge |
| Mechanical Shaft Seal | Stainless Steel Valve Plate & NBR Seals |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock - Enterprise Rd, Nairobi |
System fitment & verified replacements
Interchangeable models
Commonly installed on equipment from
Common questions on this part
The PS-02B features an adjustable cut-in pressure dial (1.5 bar to 3.0 bar) and heavy 16A switching contacts, allowing direct control of single-phase motors up to 2.2kW (3.0HP).
Yes, following a dry-run trip, the controller tests for water restoration at automated intervals, eliminating manual reset trips.
Rated for up to 10 bar maximum line pressure.
Must be installed vertically on the pump discharge with water flowing upwards through the internal check valve.
Yes, available at our trade counter on Enterprise Road, Nairobi.
