LEO XGM-6A 2.2kW (3.0HP) Extra-Large Flow Centrifugal Pump is an authentic LEO industrial component (Model/MPN: XGM-6A) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: XGM-6A, Rated Motor Power: 2.2 kW (3.0 HP), Electrical Supply: 220-240V, 50Hz, 1-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
LEO XGM-6A 2.2kW (3.0HP) Extra-Large Flow Centrifugal Pump
LEO XGM-6A 2.2kW (3.0HP) Extra-Large Flow Centrifugal Pump is an authentic LEO industrial component (Model/MPN: XGM-6A) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: XGM-6A, Rated Motor Power: 2.2 kW (3.0 HP), Electrical Supply: 220-240V, 50Hz, 1-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
Functional engineering application
OVERVIEW The LEO XGM-6A is an industrial-grade 2.2kW (3.0HP) extra-large flow centrifugal pump designed for rigorous water handling operations across Kenyan industrial, commercial, and agricultural facilities. Engineered with precision hydraulic clearances and high-grade metallurgical components, this pump ensures stable hydraulic throughput, low acoustic signature, and long service life under fluctuating operating conditions. OPERATING PRINCIPLES AND HYDRAULIC DESIGN Equipped with an optimized high-flow cast iron impeller, the XGM-6A efficiently converts mechanical shaft energy into hydraulic velocity and static pressure. With a maximum discharge head of 18 meters and peak throughput of 66.0 m3/h (1100 L/min), the unit provides dependable pressure delivery. Port dimensions of 3" G suction and 3" G discharge ensure smooth fluid velocity with minimal internal friction loss. CONSTRUCTION, MATERIALS AND MOTOR SPECIFICATIONS - Pump Body: HT200 Heavy Cast Iron Volute with electro-deposition anti-rust coating - Impeller: High-Flow Cast Iron Impeller engineered for wear resistance - Mechanical Seal: Carbon / Ceramic / NBR providing positive shaft sealing without fluid weeping - Motor: Continuous duty induction motor (220-240V, 50Hz, 1-Phase), IP44 insulation, Class F ingress protection - Integrated Protection: Built-in thermal overload cut-out on single-phase windings; external overload relay recommended on three-phase installations KENYAN APPLICATION AND INSTALLATION GUIDELINES In East African operational settings, correct plumbing and electrical installation are vital for pump longevity: 1. Suction Plumbing: Install rigid suction piping of at least 3" G diameter. For suction lift duties (up to 8m), always fit a high-integrity foot valve with stainless steel strainer screen to prevent loss of prime. 2. Electrical Protection: Wire the 220-240V, 50Hz, 1-Phase motor through a dedicated motor circuit breaker or contactor with calibrated thermal overload protection. On sites prone to voltage sags, fit an electronic under/over-voltage monitoring relay. 3. Priming: Completely fill the pump wet end and suction line with clean water through the top priming plug before energizing the motor. Never run the pump dry. 4. Foundation: Anchor the pump securely to a level concrete plinth with anti-vibration mountings to avoid pipe stress and bearing misalignment. PREVENTIVE MAINTENANCE AND STARNEX SPARES SUPPORT Inspect mechanical seal faces and shaft bearings every 2,000 running hours or semi-annually. Lubricate bearings where applicable and clean suction strainers periodically. STARNEX Industrial Spares maintains direct inventory of genuine LEO replacement seals, O-rings, impellers, capacitors, and terminal boxes at our Enterprise Road trade counter in Nairobi.
Genuine LEO XGM-6A 2.2kW (3.0HP) extra-large flow centrifugal pump engineered for dependable continuous pumping. Delivers up to 66.0 m3/h (1100 L/min) flow rate and 18m maximum head. Supplied in Kenya by STARNEX Industrial Spares with local stock and technical support.
Quotation & fulfilment
Parametric technical attributes
| LEO XGM-6A | |
| IDENTIFICATION | |
| Component Type | LEO XGM-6A 2.2kW (3.0HP) Extra-Large Flow Centrifugal Pump |
| Manufacturer / Brand | LEO |
| Part Number (MPN) | XGM-6A |
| Stock Keeping Unit (SKU) | LEO-XGM-6A |
| TECHNICAL PARAMETERS | |
| Model Code / MPN | XGM-6A |
| Electrical Supply | 220-240V, 50Hz, 1-Phase |
| Maximum Head (Hmax) | 18 meters |
| Maximum Suction Lift | 8 meters |
| Ingress Protection & Insulation | Class F, IP44 |
| PERFORMANCE & RATINGS | |
| Rated Motor Power | 2.2 kW (3.0 HP) |
| Maximum Flow Rate (Qmax) | 66.0 m³/h (1100 L/min) |
| Maximum Working Pressure | 4.0 bar |
| Liquid Temperature Range | -10°C to +60°C |
| CONSTRUCTION & CONNECTION | |
| Suction Port Size | 3" G |
| Discharge Port Size | 3" G |
| Impeller Material | High-Flow Cast Iron Impeller |
| Pump Body Material | HT200 Heavy Cast Iron Volute |
| Mechanical Shaft Seal | Carbon / Ceramic / NBR |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock - Enterprise Rd, Nairobi |
System fitment & verified replacements
Interchangeable models
Commonly installed on equipment from
Common questions on this part
The XGM-6A produces an exceptional flow of up to 66.0 m3/h (1,100 L/min) through 3-inch ports, delivering river-scale volume on single-phase 2.2kW power.
Install 3-inch (75mm or 90mm OD) suction and discharge pipework. Never reduce pipe diameter below 3 inches, as this will drastically increase friction head and cause motor overload.
Yes, it is widely utilized for canal lifting and flood basin irrigation in western Kenya and the coastal river valleys.
Wire through a dedicated 20A circuit breaker with thermal overload protection and low-voltage cutout.
Yes, STARNEX dispatches to agricultural and commercial buyers across Kenya, Uganda, Tanzania, and South Sudan.
