LEO XST32-160-15 1.5kW (2.0HP) DIN Standard Industrial End-Suction Flanged Pump is an authentic LEO industrial component (Model/MPN: XST32-160-15) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: XST32-160-15, Rated Motor Power: 1.5 kW (2.0 HP), Electrical Supply: 380-415V, 50Hz, 3-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
LEO XST32-160-15 1.5kW (2.0HP) DIN Standard Industrial End-Suction Flanged Pump
LEO XST32-160-15 1.5kW (2.0HP) DIN Standard Industrial End-Suction Flanged Pump is an authentic LEO industrial component (Model/MPN: XST32-160-15) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: XST32-160-15, Rated Motor Power: 1.5 kW (2.0 HP), Electrical Supply: 380-415V, 50Hz, 3-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
Functional engineering application
OVERVIEW The LEO XST32-160-15 is an industrial-grade 1.5kW (2.0HP) din standard industrial end-suction flanged pump designed for rigorous water handling operations across Kenyan industrial, commercial, and agricultural facilities. Engineered with precision hydraulic clearances and high-grade metallurgical components, this pump ensures stable hydraulic throughput, low acoustic signature, and long service life under fluctuating operating conditions. OPERATING PRINCIPLES AND HYDRAULIC DESIGN Equipped with an optimized aisi 304 stainless steel impeller, the XST32-160-15 efficiently converts mechanical shaft energy into hydraulic velocity and static pressure. With a maximum discharge head of 36 meters and peak throughput of 18.0 m3/h (300 L/min), the unit provides dependable pressure delivery. Port dimensions of DN50 Flange suction and DN32 Flange discharge ensure smooth fluid velocity with minimal internal friction loss. CONSTRUCTION, MATERIALS AND MOTOR SPECIFICATIONS - Pump Body: HT200 Heavy Cast Iron DIN 24255 Casing with electro-deposition anti-rust coating - Impeller: AISI 304 Stainless Steel Impeller engineered for wear resistance - Mechanical Seal: Silicon Carbide / Graphite / Viton providing positive shaft sealing without fluid weeping - Motor: Continuous duty induction motor (380-415V, 50Hz, 3-Phase), IP55 insulation, Class F ingress protection - Integrated Protection: Built-in thermal overload cut-out on single-phase windings; external overload relay recommended on three-phase installations KENYAN APPLICATION AND INSTALLATION GUIDELINES In East African operational settings, correct plumbing and electrical installation are vital for pump longevity: 1. Suction Plumbing: Install rigid suction piping of at least DN50 Flange diameter. For suction lift duties (up to 7m), always fit a high-integrity foot valve with stainless steel strainer screen to prevent loss of prime. 2. Electrical Protection: Wire the 380-415V, 50Hz, 3-Phase motor through a dedicated motor circuit breaker or contactor with calibrated thermal overload protection. On sites prone to voltage sags, fit an electronic under/over-voltage monitoring relay. 3. Priming: Completely fill the pump wet end and suction line with clean water through the top priming plug before energizing the motor. Never run the pump dry. 4. Foundation: Anchor the pump securely to a level concrete plinth with anti-vibration mountings to avoid pipe stress and bearing misalignment. PREVENTIVE MAINTENANCE AND STARNEX SPARES SUPPORT Inspect mechanical seal faces and shaft bearings every 2,000 running hours or semi-annually. Lubricate bearings where applicable and clean suction strainers periodically. STARNEX Industrial Spares maintains direct inventory of genuine LEO replacement seals, O-rings, impellers, capacitors, and terminal boxes at our Enterprise Road trade counter in Nairobi.
Genuine LEO XST32-160-15 1.5kW (2.0HP) din standard industrial end-suction flanged pump engineered for dependable continuous pumping. Delivers up to 18.0 m3/h (300 L/min) flow rate and 36m maximum head. Supplied in Kenya by STARNEX Industrial Spares with local stock and technical support.
Quotation & fulfilment
Parametric technical attributes
| LEO XST32-160-15 | |
| IDENTIFICATION | |
| Component Type | LEO XST32-160-15 1.5kW (2.0HP) DIN Standard Industrial End-Suction Flanged Pump |
| Manufacturer / Brand | LEO |
| Part Number (MPN) | XST32-160-15 |
| Stock Keeping Unit (SKU) | LEO-XST32-160-15 |
| TECHNICAL PARAMETERS | |
| Model Code / MPN | XST32-160-15 |
| Electrical Supply | 380-415V, 50Hz, 3-Phase |
| Maximum Head (Hmax) | 36 meters |
| Maximum Suction Lift | 7 meters |
| Ingress Protection & Insulation | Class F, IP55 |
| PERFORMANCE & RATINGS | |
| Rated Motor Power | 1.5 kW (2.0 HP) |
| Maximum Flow Rate (Qmax) | 18.0 m³/h (300 L/min) |
| Maximum Working Pressure | 10.0 bar |
| Liquid Temperature Range | -10°C to +85°C |
| CONSTRUCTION & CONNECTION | |
| Suction Port Size | DN50 Flange |
| Discharge Port Size | DN32 Flange |
| Impeller Material | AISI 304 Stainless Steel Impeller |
| Pump Body Material | HT200 Heavy Cast Iron DIN 24255 Casing |
| Mechanical Shaft Seal | Silicon Carbide / Graphite / Viton |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock - Enterprise Rd, Nairobi |
System fitment & verified replacements
Interchangeable models
Commonly installed on equipment from
Common questions on this part
Complies with DIN 24255 and EN 733 international dimensional and hydraulic standards, featuring standardized DN50 suction and DN32 discharge flanges for interchangeable industrial piping.
Fitted with an IP55 totally enclosed fan-cooled (TEFC) industrial motor with Class F insulation, suitable for harsh factory environments and boiler rooms.
Yes. Its back-pull-out design allows the motor, bracket, and impeller assembly to be removed for service without disturbing the pump casing or pipeline flanges.
Rated for up to 10 bar working casing pressure and temperatures up to 85°C (or up to 120°C with high-temperature seal options).
Yes, companion counter-flanges, high-tensile bolts, and rubber gaskets can be supplied upon request.
