LEO XST32-200-30 3.0kW (4.0HP) High-Head Industrial Flanged End-Suction Pump is an authentic LEO industrial component (Model/MPN: XST32-200-30) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: XST32-200-30, Rated Motor Power: 3.0 kW (4.0 HP), Electrical Supply: 380-415V, 50Hz, 3-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
LEO XST32-200-30 3.0kW (4.0HP) High-Head Industrial Flanged End-Suction Pump
LEO XST32-200-30 3.0kW (4.0HP) High-Head Industrial Flanged End-Suction Pump is an authentic LEO industrial component (Model/MPN: XST32-200-30) engineered for continuous factory operations and machinery maintenance in Kenya and across East Africa. Key verified ratings include Model Code / MPN: XST32-200-30, Rated Motor Power: 3.0 kW (4.0 HP), Electrical Supply: 380-415V, 50Hz, 3-Phase. Standard plant applications include Factory water transfer and circulating systems, Commercial building overhead tank booster supply, Agricultural crop irrigation and greenhouse watering. Held at our STARNEX counter on Enterprise Road, Nairobi Industrial Area for immediate collection or same-day dispatch. When requesting a quotation, please specify required quantity, operating voltage/phase, pipe connection size, and delivery destination.
Functional engineering application
OVERVIEW The LEO XST32-200-30 is an industrial-grade 3.0kW (4.0HP) high-head industrial flanged end-suction pump designed for rigorous water handling operations across Kenyan industrial, commercial, and agricultural facilities. Engineered with precision hydraulic clearances and high-grade metallurgical components, this pump ensures stable hydraulic throughput, low acoustic signature, and long service life under fluctuating operating conditions. OPERATING PRINCIPLES AND HYDRAULIC DESIGN Equipped with an optimized aisi 304 stainless steel impeller, the XST32-200-30 efficiently converts mechanical shaft energy into hydraulic velocity and static pressure. With a maximum discharge head of 52 meters and peak throughput of 21.0 m3/h (350 L/min), the unit provides dependable pressure delivery. Port dimensions of DN50 Flange suction and DN32 Flange discharge ensure smooth fluid velocity with minimal internal friction loss. CONSTRUCTION, MATERIALS AND MOTOR SPECIFICATIONS - Pump Body: HT200 Heavy Cast Iron DIN 24255 Casing with electro-deposition anti-rust coating - Impeller: AISI 304 Stainless Steel Impeller engineered for wear resistance - Mechanical Seal: Silicon Carbide / Graphite / Viton providing positive shaft sealing without fluid weeping - Motor: Continuous duty induction motor (380-415V, 50Hz, 3-Phase), IP55 insulation, Class F ingress protection - Integrated Protection: Built-in thermal overload cut-out on single-phase windings; external overload relay recommended on three-phase installations KENYAN APPLICATION AND INSTALLATION GUIDELINES In East African operational settings, correct plumbing and electrical installation are vital for pump longevity: 1. Suction Plumbing: Install rigid suction piping of at least DN50 Flange diameter. For suction lift duties (up to 7m), always fit a high-integrity foot valve with stainless steel strainer screen to prevent loss of prime. 2. Electrical Protection: Wire the 380-415V, 50Hz, 3-Phase motor through a dedicated motor circuit breaker or contactor with calibrated thermal overload protection. On sites prone to voltage sags, fit an electronic under/over-voltage monitoring relay. 3. Priming: Completely fill the pump wet end and suction line with clean water through the top priming plug before energizing the motor. Never run the pump dry. 4. Foundation: Anchor the pump securely to a level concrete plinth with anti-vibration mountings to avoid pipe stress and bearing misalignment. PREVENTIVE MAINTENANCE AND STARNEX SPARES SUPPORT Inspect mechanical seal faces and shaft bearings every 2,000 running hours or semi-annually. Lubricate bearings where applicable and clean suction strainers periodically. STARNEX Industrial Spares maintains direct inventory of genuine LEO replacement seals, O-rings, impellers, capacitors, and terminal boxes at our Enterprise Road trade counter in Nairobi.
Genuine LEO XST32-200-30 3.0kW (4.0HP) high-head industrial flanged end-suction pump engineered for dependable continuous pumping. Delivers up to 21.0 m3/h (350 L/min) flow rate and 52m maximum head. Supplied in Kenya by STARNEX Industrial Spares with local stock and technical support.
Quotation & fulfilment
Parametric technical attributes
| LEO XST32-200-30 | |
| IDENTIFICATION | |
| Component Type | LEO XST32-200-30 3.0kW (4.0HP) High-Head Industrial Flanged End-Suction Pump |
| Manufacturer / Brand | LEO |
| Part Number (MPN) | XST32-200-30 |
| Stock Keeping Unit (SKU) | LEO-XST32-200-30 |
| TECHNICAL PARAMETERS | |
| Model Code / MPN | XST32-200-30 |
| Electrical Supply | 380-415V, 50Hz, 3-Phase |
| Maximum Head (Hmax) | 52 meters |
| Maximum Suction Lift | 7 meters |
| Ingress Protection & Insulation | Class F, IP55 |
| PERFORMANCE & RATINGS | |
| Rated Motor Power | 3.0 kW (4.0 HP) |
| Maximum Flow Rate (Qmax) | 21.0 m³/h (350 L/min) |
| Maximum Working Pressure | 10.0 bar |
| Liquid Temperature Range | -10°C to +85°C |
| CONSTRUCTION & CONNECTION | |
| Suction Port Size | DN50 Flange |
| Discharge Port Size | DN32 Flange |
| Impeller Material | AISI 304 Stainless Steel Impeller |
| Pump Body Material | HT200 Heavy Cast Iron DIN 24255 Casing |
| Mechanical Shaft Seal | Silicon Carbide / Graphite / Viton |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock - Enterprise Rd, Nairobi |
System fitment & verified replacements
Interchangeable models
Commonly installed on equipment from
Common questions on this part
Develops up to 52 meters head (5.2 bar) with a 200mm diameter impeller, delivering 21 m3/h flow for high-pressure plant utility feeds.
Tea processing factories, breweries, edible oil refineries, and industrial boiler feed circuits.
Equipped with silicon carbide vs graphite with Viton elastomers for superior chemical and thermal resistance.
Standard PN10 / PN16 flanged connections conforming to ISO 7005-2.
Check the nameplate or stamped part number on your existing unit, along with operating parameters (e.g. dimensions, voltage, pressure rating, or connection size). You can share a photo of the nameplate directly via WhatsApp or our Request a Quote form, and our sales desk will confirm technical fitment, lead time, and pricing.
