MAHACO SHAL HT Castable Cement MAXHEAT K is an industrial spare component used for Burner Quarl Block & Throat Ring Casting. STARNEX Industrial Spares supplies and sources MAHACO SHAL spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
MAHACO SHAL HT Castable Cement MAXHEAT K
MAHACO SHAL HT Castable Cement MAXHEAT K is an industrial spare component used for Burner Quarl Block & Throat Ring Casting. STARNEX Industrial Spares supplies and sources MAHACO SHAL spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Functional engineering application
The MAHACO SHAL HT Castable Cement MAXHEAT K (MPN: MAXHEAT-K-50KG) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| MAHACO SHAL MAXHEAT-K-50KG | |
| IDENTIFICATION | |
| Component Type | MAHACO SHAL HT Castable Cement MAXHEAT K |
| Manufacturer / Brand | MAHACO SHAL |
| Part Number (MPN) | MAXHEAT-K-50KG |
| Stock Keeping Unit (SKU) | STX-HEAT-MAXHEATK-034 |
| TECHNICAL PARAMETERS | |
| Brand & Grade | MAHACO SHAL MAXHEAT K |
| Refractory Type | High Alumina Dense Hydraulic Castable Cement |
| Alumina Content (Al₂O₃) | ≥ 60% |
| Iron Oxide Content (Fe₂O₃) | ≤ 2.0% |
| Bulk Density (after drying at 110°C) | 2.20 - 2.35 g/cm³ (2200-2350 kg/m³) |
| Cold Crushing Strength (after 110°C) | ≥ 40 MPa |
| Cold Crushing Strength (after 1400°C) | ≥ 50 MPa |
| Water Addition Required for Mixing | 9.0% - 11.0% by weight clean water |
| Initial Setting Time | 30 - 60 minutes |
| Final Setting Time | 2 - 4 hours |
| Packaging | 50 kg Moisture-Resistant Multi-Ply Paper/HDPE Bag |
| PERFORMANCE & RATINGS | |
| Maximum Temperature Rating | 1600°C (2912°F) |
| Continuous Operating Temperature | 1500°C (2732°F) |
| COMPLIANCE & STANDARDS | |
| Country of Origin | India (MAHACO Refractories) |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
MAXHEAT K is rated for peak temperatures up to 1600°C (2912°F) and continuous service up to 1500°C (2732°F).
Mix with 9.0% to 11.0% clean potable water by weight (approx. 4.5 to 5.5 liters per 50kg bag) using a mechanical paddle mixer.
It is the industry standard castable for casting burner quarl blocks, boiler throat rings, firebox arches, and repairing spalled firebrick walls.
After casting, allow it to air-cure for 24 hours at room temperature, followed by a controlled dry-out heating schedule (heating at 25°C/hr up to 350°C).
It contains a minimum of 60% high-purity alumina (Al₂O₃), providing superior resistance to thermal shock and slag erosion.
Approximately 45 to 47 bags (2250 kg) are required to cast 1 cubic meter of dense refractory lining.
Yes, it can be cast into formwork, vibration-cast, or hand-troweled into small patch repairs.
When stored off the floor in a dry, covered warehouse, shelf life is 12 months from the date of manufacture.
Yes, STARNEX holds extensive warehouse inventory of MAHACO SHAL MAXHEAT K in Nairobi Industrial Area.
Yes, STARNEX provides complete technical data sheets and recommended initial dry-out schedule charts with every purchase.
