PIX-X'set Narrow Wedge V-Belt — Section SPZ (SPZ-1000 / 9.7×8mm) is an industrial spare component used for Commercial laundry washing machines, extractors, and ironers. STARNEX Industrial Spares supplies and sources PIX spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
PIX-X'set Narrow Wedge V-Belt — Section SPZ (SPZ-1000 / 9.7×8mm)
PIX-X'set Narrow Wedge V-Belt — Section SPZ (SPZ-1000 / 9.7×8mm) is an industrial spare component used for Commercial laundry washing machines, extractors, and ironers. STARNEX Industrial Spares supplies and sources PIX spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Functional engineering application
The PIX-X'set Narrow Wedge V-Belt — Section SPZ (SPZ-1000 / 9.7×8mm) (MPN: SPZ-1000) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| PIX SPZ-1000 | |
| IDENTIFICATION | |
| Component Type | PIX-X'set Narrow Wedge V-Belt — Section SPZ (SPZ-1000 / 9.7×8mm) |
| Manufacturer / Brand | PIX |
| Part Number (MPN) | SPZ-1000 |
| Stock Keeping Unit (SKU) | PIX-WBLT-SPZ1000 |
| TECHNICAL PARAMETERS | |
| Manufacturer | PIX Transmissions Ltd |
| Product Line | PIX-X'set® Narrow Wedge V-Belts |
| Belt Section Profile | Section SPZ (Compact Narrow Wedge) |
| Top Width (W) | 9.7 mm (3/8 in) |
| Height / Thickness (T) | 8.0 mm (5/16 in) |
| Included Angle | 40° (Deep Wedge Geometry) |
| Datum / Pitch Length (Ld / Lp) | 1000 mm (39.4 in) |
| Inside Length (Li) | ~963 mm (Lp - 37mm) |
| Outside Length (La) | 1013 mm (Lp + 13mm) |
| Base Elastomer Compound | Synthetic Polychloroprene Rubber Matrix |
| Outer Envelope Fabric | Rubber-Impregnated Bias-Cut Cotton-Polyester |
| Min. Recommended Pulley Dia. | 63 mm Pitch Diameter |
| Max Linear Belt Speed | Up to 42 m/s |
| CONSTRUCTION & CONNECTION | |
| Tensile Cord Material | High-Modulus Low-Stretch Polyester Tensile Core |
| COMPLIANCE & STANDARDS | |
| Antistatic Compliance | ISO 1813 Certified (< 10^6 Ω) |
| Manufacturing Standards | DIN 7753 Part 1, ISO 4184, BS 3790 |
| PERFORMANCE & RATINGS | |
| Temperature Range | -18 °C to +80 °C (-0 °F to +176 °F) |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
Yes, provided the pulleys are compatible with wedge belts. The SPZ belt (9.7×8mm) is deeper than the classical Z belt (10×6mm) and provides substantially higher power transmission capacity.
'SPZ' indicates the narrow wedge profile with 9.7 mm top width and 8 mm thickness. '1000' is the datum pitch length (Lp) in millimeters. Its inside circumference (Li) is approximately 963 mm.
The recommended minimum pulley pitch diameter for an SPZ belt is 63 mm. For pulleys smaller than 63 mm, consider using a raw-edge cogged XPZ belt to prevent premature cracking.
Yes. SPZ belts are rated for linear belt speeds up to 42 m/s, making them ideal for direct-drive 2-pole 2900 RPM motors running small industrial fans and centrifugal pumps.
STARNEX dispatches genuine PIX belts daily from our Nairobi warehouse to commercial laundries, hotels, and workshops in Mombasa, Kisumu, Nakuru, and Eldoret.
