Siemens RMO 88.53D2 Burner Control Box is an industrial spare component used for Commercial & Industrial Forced-Draft Oil Burners. STARNEX Industrial Spares supplies and sources Siemens spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Siemens RMO 88.53D2 Burner Control Box
Siemens RMO 88.53D2 Burner Control Box is an industrial spare component used for Commercial & Industrial Forced-Draft Oil Burners. STARNEX Industrial Spares supplies and sources Siemens spare parts for maintenance engineers, plant operators, and procurement teams in Kenya and East Africa. Before ordering, verify the manufacturer part number (MPN), voltage/pressure specifications, and equipment compatibility.
Functional engineering application
The Siemens RMO 88.53D2 Burner Control Box (MPN: RMO88.53D2) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Siemens RMO88.53D2 | |
| IDENTIFICATION | |
| Component Type | Siemens RMO 88.53D2 Burner Control Box |
| Manufacturer / Brand | Siemens |
| Part Number (MPN) | RMO88.53D2 |
| Stock Keeping Unit (SKU) | SIE-CB-RMO8853D2 |
| TECHNICAL PARAMETERS | |
| Controller Model | Siemens RMO 88.53D2 230V |
| Manufacturer | Siemens (Germany) |
| Burner Stages | 1-Stage or 2-Stage Forced-Draft Oil Burners |
| Pre-Purge Time (t1) | 15.0 Seconds |
| Pre-Ignition Time (t3) | 15.0 Seconds |
| Safety Time (t2 max) | 5.0 Seconds |
| Status Indicator | Multicolor Diagnostic LED (Green/Yellow/Red) |
| Flame Detector Input | QRB1 / QRB3 / QRC1 Photo-electric |
| Terminal Rating | 5 A max per output (total 10 A) |
| Remote Reset Input | Optocoupler Input for Remote Pushbutton |
| Degree of Protection | IP 40 |
| Weight | 0.30 kg |
| PERFORMANCE & RATINGS | |
| Mains Voltage | 220 - 240 V AC 50/60 Hz |
| Power Consumption | 3.5 VA |
| COMPLIANCE & STANDARDS | |
| Origin | Germany |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
- Siemens LAL 2.25 Burner Control Box
- Sudick LMO24 Burner Control Box
Commonly installed on equipment from
Common questions on this part
The LED flashes specific color codes to indicate normal sequence phases (yellow=ignition, green=flame OK) or exact fault causes (red blink codes for loss of flame, air switch failure, etc.).
Available for immediate pickup at STARNEX Industrial Spares, SMK Business Center, Enterprise Road, Industrial Area, Nairobi.
Yes, we ship daily to Kampala, Jinja, Dar es Salaam, Arusha, Mwanza, Kigali, and Bujumbura.
Yes, the RMO 88.53D2 is the direct upgraded replacement for earlier A2, B2, and C2 series controllers.
Yes, it includes a dedicated optocoupler terminal for connecting a remote panel reset pushbutton.
The pre-purge period (t1) is pre-set at 15.0 seconds.
The safety time limit is 5.0 seconds maximum.
It works with QRB1, QRB3 photo-resistors and QRC1 blue-flame detectors.
Yes, it plugs directly into the standard Siemens RMO88 base socket.
The built-in undervoltage circuit prevents burner startup to prevent relay chatter and coil burnout.
Yes, our engineering team provides official Siemens RMO blink code diagnostic charts upon request.
It operates on standard 220-240 V AC 50/60 Hz single-phase power.
Yes, corporate discounts are available for tea companies, sugar mills, and factories.
Yes, counter pickup is available immediately at SMK Business Center, Enterprise Road.
Yes, STARNEX provides official KRA E-TIMS tax invoices with complete VAT breakdown.
