3 Inch × 2 Inch Reducing Rubber Expansion Joint is an industrial spare component used for Pump Suction Line Reduction (3" Pipe to 2" Pump Port). STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
3 Inch × 2 Inch Reducing Rubber Expansion Joint
3 Inch × 2 Inch Reducing Rubber Expansion Joint is an industrial spare component used for Pump Suction Line Reduction (3" Pipe to 2" Pump Port). STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Functional engineering application
The 3 Inch × 2 Inch Reducing Rubber Expansion Joint (MPN: STX-EXP-RED3X2) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Generic STX-EXP-RED3X2 | |
| IDENTIFICATION | |
| Component Type | 3 Inch × 2 Inch Reducing Rubber Expansion Joint |
| Manufacturer / Brand | Generic |
| Part Number (MPN) | STX-EXP-RED3X2 |
| Stock Keeping Unit (SKU) | STX-EXP-R32-055 |
| TECHNICAL PARAMETERS | |
| Joint Type | Concentric Reducing Rubber Expansion Joint |
| Reinforcement | Nylon Cord & Steel Wire Rings |
| Overall Length | 150 mm |
| Weight | 5.4 kg |
| Country of Manufacture | International OEM Standard |
| CONSTRUCTION & CONNECTION | |
| Inlet Flange Size | 3 Inch (DN80 PN16) |
| Outlet Flange Size | 2 Inch (DN50 PN16) |
| Elastomer Material | High Grade EPDM Rubber |
| Flange Material | Electro-Galvanized Carbon Steel |
| PERFORMANCE & RATINGS | |
| Pressure Rating | 16 Bar (232 PSI) |
| Temperature Rating | -10°C to +110°C |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
One end is 3" (DN80 PN16) and the opposite end is 2" (DN50 PN16).
Rated for 16 Bar (232 PSI) working pressure.
Face-to-face length is 150 mm.
Yes, stocked at STARNEX Nairobi Industrial Area.
Yes, EPDM rubber handles hot water up to 110°C.
Yes, it isolates motor hum and fluid vibration.
Yes, widely used on boiler feedwater pump suction ports.
Yes, electro-galvanized carbon steel flanges.
Yes, replaces separate spool reducers and expansion joints.
Weight is 5.4 kg.
