Bare Deep Well Submersible Pump 200QJ40-48/4 is an industrial spare component used for Deep Groundwater Borehole Extraction. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Bare Deep Well Submersible Pump 200QJ40-48/4
Bare Deep Well Submersible Pump 200QJ40-48/4 is an industrial spare component used for Deep Groundwater Borehole Extraction. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Functional engineering application
The Bare Deep Well Submersible Pump 200QJ40-48/4 (MPN: STX-PMP-200QJ40484) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Generic STX-PMP-200QJ40484 | |
| IDENTIFICATION | |
| Component Type | Bare Deep Well Submersible Pump 200QJ40-48/4 |
| Manufacturer / Brand | Generic |
| Part Number (MPN) | STX-PMP-200QJ40484 |
| Stock Keeping Unit (SKU) | STX-PMP-200QJ40-058 |
| TECHNICAL PARAMETERS | |
| Pump Type | Multi-Stage Deep Well Submersible Borehole Bare Pump |
| Model Code | 200QJ40-48/4 |
| Number of Stages | 4 Stages |
| Total Head | 48 Meters (4.8 Bar) |
| Sand Content Capacity | < 50 g/m³ |
| Weight | 48 kg |
| Country of Manufacture | International OEM Standard |
| CONSTRUCTION & CONNECTION | |
| Borehole Diameter Fit | 8 Inch (200 mm Minimum Well Casing) |
| Discharge Outlet Diameter | DN 80 (3 Inch Female BSP Thread) |
| Impeller & Diffuser Material | Abrasion Resistant Cast Iron / Bronze |
| Shaft Material | AISI 420 Stainless Steel Spline Shaft |
| PERFORMANCE & RATINGS | |
| Nominal Flow Rate | 40 m³/h (176 GPM) |
| Maximum Water Temperature | 35°C |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
No, this is a bare shaft pump head (wet end). A separate 8" NEMA submersible motor is required.
Delivers 40 m³/h flow at 48 meters total dynamic head.
Fits minimum 8-inch (200 mm) inner diameter borehole casing.
3 Inch (DN80) female BSP thread.
Yes, in stock at STARNEX Nairobi.
Handles up to 50 g/m³ sand content.
4 stages.
AISI 420 Stainless Steel.
Yes, ideal for large farm irrigation.
Weight is 48 kg.
