DIN End Suction Pump Assembly 100-26(H) 90kW 2P IE2 is an industrial spare component used for Steam Boiler Feedwater Supply Systems. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
DIN End Suction Pump Assembly 100-26(H) 90kW 2P IE2
DIN End Suction Pump Assembly 100-26(H) 90kW 2P IE2 is an industrial spare component used for Steam Boiler Feedwater Supply Systems. STARNEX Industrial Spares supplies this replacement component in Kenya with technical sourcing support across East Africa. Before ordering, confirm the required dimensions, connection standards, and equipment model with our technical sales team.
Functional engineering application
The DIN End Suction Pump Assembly 100-26(H) 90kW 2P IE2 (MPN: STX-PMP-DIN10026H-90KW) is built for continuous-duty industrial piping, holding pressure, temperature, and cycling loads in factory installations across Kenya and East Africa.
Quotation & fulfilment
Parametric technical attributes
| Generic STX-PMP-DIN10026H-90KW | |
| IDENTIFICATION | |
| Component Type | DIN End Suction Pump Assembly 100-26(H) 90kW 2P IE2 |
| Manufacturer / Brand | Generic |
| Part Number (MPN) | STX-PMP-DIN10026H-90KW |
| Stock Keeping Unit (SKU) | STX-PMP-DIN100-051 |
| COMPLIANCE & STANDARDS | |
| Pump Standard & Type | DIN 24255 / EN 733 End Suction Centrifugal Pump |
| TECHNICAL PARAMETERS | |
| Model Code | 100-26(H) |
| Motor Rating | 90 kW (120 HP) / 2-Pole (2900 RPM) |
| Motor Efficiency Class | IE2 High Efficiency Electric Motor |
| Electrical Supply | 400V / 690V AC, 3-Phase, 50Hz |
| Total Dynamic Head (TDH) | 85 Meters (8.5 Bar) |
| Baseplate & Coupling | Heavy Duty C-Channel Steel Base with Flexible Guarded Coupling |
| Protection Class & Insulation | IP55 Enclosure / Class F Insulation |
| Weight | 680 kg |
| Country of Manufacture | International OEM Standard |
| CONSTRUCTION & CONNECTION | |
| Suction Inlet Flange | DN 125 (5 Inch) PN16 Flange |
| Discharge Outlet Flange | DN 100 (4 Inch) PN16 Flange |
| Pump Body & Impeller Material | High Grade GG25 Cast Iron |
| Shaft & Shaft Sleeve Material | AISI 420 Stainless Steel |
| Mechanical Shaft Seal | Silicon Carbide / Carbon / Viton Heavy Duty |
| PERFORMANCE & RATINGS | |
| Maximum Nominal Flow Rate | 250 m³/h (1100 GPM) |
| Maximum Operating Temperature | 120°C (248°F) |
| COMPLIANCE & LOGISTICS | |
| Stock Availability | In Stock — Enterprise Rd, Nairobi |
| KRA Tax Status | Official KRA E-TIMS Tax Invoice Available |
System fitment & verified replacements
Verified interchangeable models
Commonly installed on equipment from
Common questions on this part
It means the pump dimensions, flange ratings, and performance curves strictly follow European international standards, allowing drop-in replacement for KSB, Grundfos, and Lowara pumps.
It is driven by a 90kW (120 HP) 2-pole 3-phase IE2 high-efficiency electric motor operating at 2900 RPM.
It delivers a maximum flow rate of 250 m³/h (1100 GPM) and a total dynamic head of 85 meters (8.5 Bar).
It allows maintenance engineers to remove the motor, coupling, and internal impeller assembly without unbolting the suction or discharge pipework.
It is pre-fitted with a heavy-duty Silicon Carbide / Carbon / Viton mechanical shaft seal rated to 120°C.
Yes, the 120°C temperature rating and robust cast iron construction make it ideal for boiler feedwater and hot water circulation.
It operates on 3-phase 400V / 690V AC at 50Hz.
Yes, it includes a heavy C-channel steel baseplate, flexible coupling, and safety coupling guard.
Available at STARNEX Industrial Spares in Nairobi Industrial Area.
The complete pump, motor, coupling, and baseplate assembly weighs approximately 680 kg.
